INSTRUCTIONS
DOWNLOAD PRODUCT FILES:
Symbol Guide
Symbols
Power On/Off
On / Off Button for WildFire
Play/Pause
Press to Play or Pause a song
Next Song/Volume +
Skip to the next song by pressing + once. Increase volume by holding +
Flames
On/Off Button for LED Flame Effect
Multi-Pair
Pair 2 or more WildFire speakers
Previous Song / Volume -
Go back to the previous song by pressing – once. Decrease volume by holding –
Powering Speaker
Symbols
Power On
Press and hold the power on/off button for 2 seconds until the glow ring lights. The speaker will announce it’s on.
Power Off
Press and hold the power on/off button until the glow ring is no longer lit.
Using Speaker
Symbols
Step 1:
Power on your WildFire Bluetooth Speaker
Step 2:
Connect to the WildFire speaker using a wireless Bluetooth device of your choosing.
Step 3:
You may now begin playing music with your WildFire Speaker.
Step 4:
Adjust speaker volume using the volume “+” and “-” buttons displayed on the glow ring, or via the volume controls on your Bluetooth transmitting device.
Bluetooth Pairing
Symbols
Step 1:
With the speaker powered on, activate Bluetooth on the Bluetooth transmitting device (cell phone, tablet, laptop, etc.) of your choice.
Step 2:
Search for WFS01 on your Bluetooth pairing device.
Step 3:
Connect your Bluetooth pairing device to WFS01
Step 4:
Setup Complete
Multi-Pair Speakers
Symbols
The Multi-Pair button shown on the Glow Ring allows you to pair multiple WildFire speakers together to create a wireless surround sound atmosphere. You must have 2 or more WildFire speakers to use the multi-pair feature.
Step 1:
Determine which of your WildFire speakers will serve as the master speaker. All other receiving speakers will mimic the audio & volume settings of the master speaker. Note: Receiving speakers and the Bluetooth transmitting device must be within a 30-foot radius of the master speaker to successfully connect using multi-pair.
Step 2:
Power on an additional receiving speaker and complete the following sequence using the multi-pair button:
• Press ONCE on the Receiver Speaker
• Press TWICE on the Master Speaker
• Press TWICE again on the Receiver speaker.
Note: The devices should pair within 30 seconds or less following the sequence above.
Step 3:
Repeat step 2 for each additional WildFire speaker you wish to pair.
Step 4:
Control volume for all Multi-Paired speakers by using the Volume “+” and “-” buttons displayed on the Control Ring of the master speaker, or via the volume controls on your Bluetooth transmitting device.
Recharging WildFire
Symbols
Recharging WildFire is simple. Place USB cable into the lamp. When charging, the indicator will be red. When fully charged, the indicator will turn off.
Important:Â Speaker must be fully charged (approximately 5 hours) prior to first use.
Recalling Previous Multi-Pair Settings
Symbols
Past Multi-Pair settings can be recalled simply by powering on all the WildFire Speakers and pressing the Multi-Pair button ONCE on the master speaker.
Flame LED Effects
Symbols
On/Off Button: Press to turn on/off WildFire Tiki Torch Flame Effect.
Dimensions
Symbols
WildFire Speaker
Dimensions
WildFire Tiki
Dimensions
Assembly Diagram
Symbols
